How do you calculate when to start your descent?
Divide the altitude to lose by your descent rate to get minutes, then multiply by ground speed over 60 to get distance. Losing 10,000 ft at 1,500 fpm and 250 kt means starting 27.8 nm out. E6B Calc's Climb & Descent screen gives both numbers.
The formula
Time to descend in minutes is altitude to lose in feet divided by rate of descent in fpm. Distance to start down is ground speed in knots times that time, divided by 60. Use ground speed, not airspeed: a tailwind pushes the top of descent further out.
| Altitude to lose | Rate | Ground speed | Time | Distance |
|---|---|---|---|---|
| 4,000 ft | 500 fpm | 100 kt | 8.0 min | 13.3 nm |
| 6,000 ft | 700 fpm | 140 kt | 8.6 min | 20.0 nm |
| 10,000 ft | 1,500 fpm | 250 kt | 6.7 min | 27.8 nm |
| 15,000 ft | 2,000 fpm | 300 kt | 7.5 min | 37.5 nm |
The 3:1 rule of thumb
Multiply the thousands of feet to lose by 3 and you get the distance in nautical miles. It describes a path of about 2.9 degrees, or 333 ft per nm.
| Altitude to lose | Start down at |
|---|---|
| 5,000 ft | 15 nm |
| 10,000 ft | 30 nm |
| 15,000 ft | 45 nm |
| 20,000 ft | 60 nm |
The rate you then fly is about ground speed times 5: 120 kt wants roughly 600 fpm, 250 kt roughly 1,250 fpm.
Get it in E6B Calc
- On E6B, open Climb & Descent under Performance.
- Type Altitude to change in feet, your Ground speed and the Rate in fpm.
- Read Time and Distance covered: that distance is how far from the fix you start down.
The other way round: what rate do I need?
If air traffic control gives you a fix and an altitude, fill Distance to the fix as well. The screen then shows Required descent rate. With 6,000 ft to lose, a fix 20 nm ahead and 140 kt, it reads 700 fpm.
Questions and answers
How do you calculate top of descent?
What is the 3 to 1 rule for descent?
Does the calculation use airspeed or ground speed?
Can E6B Calc tell me the rate to make a fix?
You might also like
- How do you calculate climb gradient as a percentage? · E6B Calc
- How far can you glide after an engine failure? · E6B Calc
More E6B Calc guides
- How to calculate crosswind and headwind components, including the gust
- How to calculate true airspeed from calibrated airspeed (and Mach)
- How to read a METAR and TAF report, group by group
- How do you calculate the great-circle distance between two coordinates?
- How do you calculate climb gradient as a percentage?
- How do you put a Zulu time widget on your iPhone?
- All questions about E6B Calc
- Back to E6B Calc