MasaApps360
English
LandMeasureLandMeasure

How to measure a distance on the map on iPhone

In the Map tab of LandMeasure choose Satellite, tap Measure > Measure Distance and tap a point at every bend of the route. The Distance panel shows the total and the green checkmark saves it as a Path. Change the unit in Settings > Units.

2 min read · Updated

Can you measure a distance on the iPhone map?

Map apps are mainly built to find a route to a destination. If you want to measure a route you choose yourself, such as a trail, a running loop or the outline of a pond, you need a map where you place points. In LandMeasure you tap points on the satellite image and the app adds up the segments.

How to measure a distance

  1. In Settings > Units, set Distance to Meters (m), Kilometers (km) or Miles (mi).
  2. In the Map tab, choose Satellite (or Hybrid) and zoom in on the route.
  3. Tap Measure > Measure Distance.
  4. Tap the starting point and add a point at every bend until you reach the end.
  5. Read Distance and Points in the panel. You can drag the white handles to correct a point.
  6. Tap the green checkmark. The measurement is saved as a Path in the project and adds to its Total Distance.

Worked example: a lap of the park

Tapping three segments
SegmentLength
A → B120 m
B → C85 m
C → D140 m
Distance shown (sum)345 m (0.345 km)

The segment lengths are an example; on your route the values depend on how many points you place and where.

Tips for better readings

  • Points are joined by straight lines. On curves, place points closer together so the line follows the path.
  • Zoom in before tapping so each point lands more precisely.
  • The map needs a connection to load. If you are heading somewhere with poor signal, open it beforehand.
  • The result is a distance on the map, not turn-by-turn directions for a car or bike.

Questions and answers

Can I measure a running route?
Yes. Tap the bends of the route on the satellite map and Distance shows the total.
Does it follow roads automatically?
No. It joins your points with straight lines. On bends, place more points.
Can I change the unit?
Yes, in Settings > Units under Distance: meters, kilometers, miles, yards or feet.
Is the measured route saved?
With the green checkmark it is saved as a Path in the project and adds to its Total Distance.

More LandMeasure guides